How do I reset my Google TV remote? Press and hold the Home button. While holding the Home button, reinsert the batteries. Hold the button while the LED light is solid. When the light starts pulsing, release the button.
How do I get my Google TV remote to work? On your Android phone, open the Google TV app . Near the bottom right, tap Remote . At the top, tap Scanning for devices. Choose your device. To complete pairing, follow the instructions on your phone and TV. After pairing, you can use your phone or your remote.
How do I resync my Google remote? – FAQ
How do I relink my Google TV remote?
Wait for the remote to pair. In most cases, the remote pairs automatically. However, if the TV screen shows “Start pairing,” press and hold the “Back” and “Home” buttons on the remote until the light on the remote starts to pulse.
Why is my Google remote not responding?
Check if the remote batteries are powered and make sure they are placed correctly. Restart Your Google TV and Chromecast Remote. Reset Your Google TV and Chromecast Remote. Re-pair Your Chromecast remote and make sure all the buttons are also paired.
How do I reconnect my remote?
Power on the TV or other device you’d like to connect to. Insert batteries into your remote and point at the device. Press and release the correct device button on your remote for the device you’re connecting. Now press the power button and the device button simultaneously.
What does the light on my Google TV remote mean?
The Chromecast voice remote has an LED light below the Power and Input buttons. It tells you about the status of your remote. The batteries were installed. The LED will flash twice quickly.
Why is my TV remote not working?
Make sure none of the remote buttons are jammed or stuck. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control.
How do I pair my Sony Google TV remote?
Select Remotes & Accessories → Remote control → Connect via Bluetooth, then press and hold both the Vol – (down) and Mic buttons for 3 seconds and then you’ll see Connecting…, when the message The new remote has been connected appears, select OK.
Why won’t my Google TV Connect?
You can try to: Reboot your router, or unplug it and plug it back in. Move your router closer to your TV. Use a cable to connect your router to your TV.
Why is the white light pulsing on my Google TV remote?
Dim white: The Chromecast is on but idle. Blinking white: The Chromecast is unable to connect, or it needs to be set up. Pulsing white and orange: The Chromecast is in the process of updating.
Why is my Google Android TV remote not working?
Unplug the power cord. Wait 10 seconds. Plug the power cord back in. Set up the virtual remote again.
How do I reset my remote control?
Open the battery compartment cover and remove the batteries. Press and hold the Power button for three seconds. Insert the batteries again and close the battery compartment cover.
How do I resync my smart TV remote?
First, point the Smart Remote at the remote control sensor on the TV. On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds.
How do I reset my Amazon remote?
Alexa Voice Remote (with volume and power buttons) Press and hold the Left button, Menu button, and Back button at the same time. Hold them for 12 seconds. Release the buttons and wait 5 seconds.
